Amiga 1200CD

On the next summer after finishing the original project I thought that it was time to fix the problems that I had faced. I had also upgraded my av-receiver to new model and it was titan color instead of black so I thought that I could change the color on my Amiga also close to that. In addition of color I wanted to change the style of the front panel also to be closer match of that Yamaha av-receiver. I did some hardware changes also. I replaced the full sized CD-ROM drive with slim 24x TEAC CD-ROM. 3.5" hdd was replaced with 2.5" 4GB IBM Travelstar and ripped of AT power supply replaced with microATX power supply. New hardware had better specs but also smaller dimensions so I would have more space in the case. I took out also that external disk drive as I had some reading/writing issues with it and didn't really needed that. I was planning to put it into external case at some point. I had to buy couple of slim CD-ROM drives before I found one that was slave drive by defa...

This post is translated version of my original article to finnish Amiga magazine SAKU from December 2002 which can be found from here:  http://www.amigazone.fi/saku/41/osastot/sekalaiset/eriamiga.html How it all started The idea to change the casing begin in summer 2000 when I bought my current Amiga. A1200 setup was built into small IBM tower casing which was functional but not so pretty to watch. I decided to start it slow by buying a fitting tower case when I could find one that wouldn't be too expensive. Time went by I hadn't seen a case that would be appropriate. In spring time 2002 I got another idea. A friend of mine told me how he had seen a project in internet where a PC was built into HiFi casing for home theater usage. In the next morning I took a meter and begin to study the possibilities. A1200 with Blizzard 1230-IV combination was about 41 centimeters long so they would fit in 42 cm wide casing. Other minimum measurements were 9 cm for height and about 35 cm deepn...

The project started in the spring 2000 when I bought my Amiga 1200. Previous owner had built it into IBM Aptiva 350 tower case which was functional but not so good looking. First task was to cover the two 5.25" disk bays with white cardboard as the case was missing the lid and add an Amiga sticker on top of IBM logo. Setup at that point was: A1200 motherboard rev 2B Blizzard 1230-IV/50MHz with 16MB RAM Quantum Fireball EL 5GB HDD Hitachi 4x CD-ROM drive CDR-7730 Extra disk drive DCE Internal Scan Magic DCE keyboard adapter Belinea 10 50 35 15" SVGA-display Soon I bought also NE2000 compatible PCMCIA network card and 90 degree PCMCIA adapter as I wanted to connect my Amiga to network. I was looking for a more stylish tower case that could host my Amiga, but as the budget wasn't too high me being a student at that point, I couldn't find a good case. So couple of years later when I heard about PC that was built into "HiFi" casing I got an idea that maybe that c...